AC LED DRIVER IC

The development and integration of an innovative TRIAC-Dimmer compatibility circuit, followed by successful design and industrialization of an AC LED driver product using a very high voltage IC process.

CHALLENGE

Our customer produces a range of AC LED modules for lamp manufacturers. The products were originally built with discrete components, a different set for each module type. For performance enhancement and simplification of production and supply chain, the customer was looking for a custom ASIC solution. The customer was also expecting improved performance on TRIAC-Dimmer compatibility. With just a few external components (rectifier, fuse and surge) all module types may be produced using the same high-voltage ASIC type, provided that is programmable. LED modules with such an ASIC are directly driven from the AC mains voltage, are low-cost and are very compact and reliable.

TIME

In 3 weeks we realized a discrete prototype demonstrator proving dimmer compatability. Another 3 weeks later we came to an IC definition, IC process selection and proposed a design and development plan.

ac-led-driver-asic-custom-design
ac-led-module-custom-ic-design

SOLUTION

A set of TRIAC dimmers was investigated by SystematIC for their interaction with the customer’s existing discrete AC LED product. SystematIC design methodologies were used to develop a discrete electronic solution that made the customer AC LED lamp compatible with many TRIAC-based dimmers. The discrete electronics where chosen such that they could be implemented in a HV IC process. A discrete prototype was build and demonstrated to the customer just a few weeks after first contact. This successful demonstration was the first step of the feasibility phase that followed. In that phase the IC architecture and feature set were defined in cooperation with the customer and a suitable high-voltage process,  chip architecture and chip area estimation were proposed. SystematIC was selected as development partner and detailed IC design and ASIC development and industrialization followed in close interaction with the customer.

WE ARE PROUD ..

.. of our development of an innovative TRIAC-dimmer compatibility circuit, our successful design of an AC LED product using a very high voltage IC process, and our succesful industrialization of the product in two versions. The TQFN assembled version is surface mounted on LED board modules (coaster size). The gold-plated bare die version is bonded directly onto ceramic LED modules in a very small form factor (stamp size). Both tested wafer and packaged in tape-on-reel delivery are supported.

BENEFITS FOR CUSTOMER

The custom ASIC development and industrialization process was entirely handled by SystematIC, including development of wafer test, assembly with custom (HV) leadframe and final test. Thus the customer avoided risk and gained valuable time. We developed a programmable device that can support various product LED module lines of the customer using the same ASIC (a few W to 20W power range).

The customer’s supply and production chain was simplified while enhanced performance, more flexibility and additional features were realized.

KEY TECHNICAL STATISTICS

  • -40 ⁰C to 125 ⁰C ambient, 150 ⁰C junction
  • Direct rectified mains supplied
  • 400 V / 200 mA programmable branches (700 V max)
  • Single IC drives 3 LED strings
  • Dual IC solution to support up to 6 branches
  • Programmable TC and OTP protections
  • Flexibel Analog DIM control
  • Compatible to TRIAC dimmers
  • Auxilary supply output
  • I2C interface

OUR OTHER SUCCESS STORIES

Successful achievement of your company’s goals will require IC solutions that are tailor made for your business needs. SystematIC was founded to help businesses imagine, plan, and develop these IC solutions.

INTEGRATED MAGNETIC SENSOR

Our customers is the Isolation Products Division of a semiconductor leader, who has a strong portfolio based on optical isolation techniques. Application of this fully integrated single chip magnetic sensor opened a new line of magnetic isolation products. Based on our reference high speed magnetic design in 2 months’ time a 180nm CMOS prototype was shipped.

Read more >

PROXIMITY AND AMBIENT LIGHT DETECTION

SystematIC has designed a family of products which combines Ambient Light Sensor (ALS) and Infra-red Proximity Detection Sensor (PS) in a single SoC. The ambient light sensor matches the response of the human eye. The infra red proximity sensor measures the distance to an object.  Our client is a leading global organization providing components to mobile phone manufacturing companies.

Read more >

CURRENT SENSOR

We were handed the responsibility of a current sensor IC that  monitors charge and discharge currents of a battery in a mobile phone and will remain insensitive to the variations of the supply voltage. We took charge of the entire design trajectory along with evaluation and redesign that was needed to make the final product a notch better than competition.

Read more >

TIRE PRESSURE MONITOR

In this project we developed an analog front-end architecture for a given capacitive MEMS pressure sensor. The front end must accurately measure the pressure in a tire and be robust against leakage, parasitics and noise. The SystematIC methodology was applied. First off, the sensor was electronically modelled to determine an optimal excitation and read out architecture. Next, during the detailed design phase the front-end was designed and layouted for a modern automotive IC application, including safety and test features.

Read more >

X-RAY DETECTOR READOUT

The customer has a leading international position in industrial X-ray crystallography systems. In one of these products a multi-channel HV passive X-ray sensor is applied for material analysis and an accurate matched channel readout and signal processing ASIC is required. SystematIC proposed an architecture of ultra-low noise front ends that are noise optimized to the sensor element and applied in a matched channel configuration. The digital electronics where designed as special CMOS CML logic to obtain low crosstalk.

Read more >

AC LED DRIVER IC

Our customer produces a range of AC LED modules for lamp manufacturers. The products were originally built with discrete components, a different set for each module type. For performance enhancement and simplification of production steps and supply chain, the customer was looking for a custom ASIC solution. The customer was also expecting improved performance on TRIAC dimmer compatibility and a reduction in product costs. With a programmable high-voltage ASIC and only a few external components (rectifier, fuse and surge) all module types can be made. LED modules with such an ASIC are directly driven from the AC mains voltage, are low-cost and are very compact and reliable. An electronic solution was created that made the customer AC LED lamp compatible with TRIAC dimmers. A discrete prototype was built and demonstrated to the customer just a few weeks after the first contact. The discrete electronics where chosen such that they could be implemented in a HV IC process.

Read more >

POINT-OF-LOAD POWER CONTROLLER

Our customer, a fabless semiconductor company, started a new product line of drivers and controllers for power converter applications in industrial applications. SystematIC took care of the design of a complex power controller IC targeting application in Point-of-Load Power Modules, used in Ethernet Routers and Switches and other Industrial Applications. The customer’s approach was to offer a very versatile IC to the market that also realized excellent performance parameters (efficiency, ripple, etc). The customer discovered a strong market interest and had marketing & sales and application support in place but lacked the IC design resources for a quick product development. Within a year SystematIC developed all accurate analog functions in a new IC process and delivered the verified mixed-signal chip design and layout.

Read more >

INTEGRATED POWER SWITCH

Applications supporting plug-and-play connections require (accurate) over-current protections, preferably implemented in a low-cost solid-state IC. For a division of a large semiconductor company the accurate current control was a design challenge that was tackled by involving SystematIC in the design. The area, cost-of-silicon and on-resistance of the integrated power switch are relevant parameters for the technology choice, but in any case dictate preference for an NMOS power switch. Using an NMOS switch however complicates the design of driver and sensing circuits. SystematIC did the challenging full-chip circuit design, including current sensing circuits using low-offset chopped amplifiers, adjustable over-current current control, over-temperature protection, and push-pull chargepumps to drive the NMOS.

Read more >

EAR PROTECTION CONTROL IC

Our customer DEC develops and produces Dynamic Sound technology products which can typically be used as stand-alone hearing protection or embedded in headphone systems, hearing aids and hearables. The IC we designed for DEC was an example of an integration project for SME and it covers most aspects of a SystematIC turnkey solution. Our contribution extends from system study to  implementation, manufacturability and testability for ears, from zeroing in the IC process to IC design and layout and the production preparation.

Read more >

ELECTRIC PROPULSION

State-of-the-art electric propulsion (EP) systems used in satellites may exhibit impressive performance, but the used technologies cannot be scaled down in size and power whilst retaining system performance. As a result, no conventional technologies for propulsion are available for the upcoming micro- and nanosatellite market. SystematIC partners in the HiperLoc-EP project which aims to use a novel electric propulsion approach and develop an Electrospray Colloid Electric Propulsion System (ECEPS) suitable for small (cubesat) form factors.

Read more >

PLEASE TELL US ABOUT YOUR PROJECT

Please enter your name.
Please enter a message.